Remove redundant fields from courseware API. These are all found in courseHome:
- number
- org
- originalUserIsStaff
- isStaff
- verifiedMode
- isMasquerading (virtual field from isStaff and originalUserIsStaff)
- Assume that Learning Sequences is available (waffle has been
removed)
- Stop calling course blocks API, which provided mostly duplicated
information now.
- Refactor a bit to avoid needing to globally know which units
exist in sequences. That is now provided just-in-time for only
the current sequence.
- Add /first and /last URLs that you can use instead of unit IDs
in URL paths, in service of the above point.
AA-1040
AA-1153
This is the first step toward clearing out the redundant metadata from the
coursewareMetadata and getting it from a common source - the courseHomeMetadata.
remove username from coursewareMetadata
Remove courseAccess from coursewareMetadata.
Fix all unit tests
Modify classes that use metadataModel to use courseHomeMetadata for common data.
metadataModel still exists as a mechanism to distinguish if a component is under
courseware or courseHome, and it will be renamed or removed in a later refactor.
For performance and long term simplification reasons, we want to take
the work currently done by the Course Blocks API and split it up between
the Learning Sequences API (course outline) and Sequence Metadata API
(details about the Units in a Sequence). This will also make it easier
to later support different kinds of Sequences, where we might not know
all the details about it at the time we load the course-wide outline
data.
This starts moving over the responsibility for the high level outline
and metadata to Learning Sequences. It requires that the waffle flag
"learning_sequences.use_for_outlines" be active in the LMS. If that flag
is not active, the Learning Sequences API call will return a 403 error,
and this code will fall back to the older behavior.
Some data could not be shifted over yet. Namely:
* Sequence legacy URL is not currently output by the Learning Sequences
API. This is simple to add, but I don't know if there's any point in
adding it now that the Courseware MFE is functional for timed exams.
* Unit metadata was not completely shifted over to the Sequence Metadata
API because doing so would cause blocking requests and would cause a
noticeable performance regression. This should not be moved over until
the Sequence Metadata API can be made more performant.
* Effort Estimation currently relies on content introspection of the
underlying content in a way that the Learning Sequences API does not
support.
This is the last of a handful of PRs in support of TNL-8330.
The courseware was properly reading the access errors and
redirecting the user as appropriate (like to the dashboard or
whatever).
This requires a backend change to push the error along.
Removes sequences we shouldn't see by using the Learning Sequences API
(TNL-8377). Depends on https://github.com/edx/edx-platform/pull/27955
It works by adding a call to the Learning Sequences API and (if that
endpoint is enabled, i.e. returns 200 for this user+course), uses the
results of that endpoint to remove sequences from the Course Blocks API
call. Learning Sequences knows how to do things like bubble up the
content group settings of units to sequences for the case where all
units have the same restrictions and the user would see an empty
sequence.
This component blocks access to graded units when
the user is required to sign the integrity agreement for
the course. Once signed, it will not appear for the course
again.
They've changed to proper new-style handlers, so the URL also
changed. This will let us get the fix for green checkmarks showing
up as audit users pass FBE units, even though those units aren't
actually complete.
AA-409
Valid courseware URLs currently include:
* /course/:courseId
* /course/:courseId/:sequenceId
* /course/:courseId/:sequenceId/:unitId
In this commit we add support for:
* /course/:courseId/:sectionId
* /course/:courseId/:sectionId/:unitId
* /course/:courseId/:unitId
All URL forms still redirect to:
/course/:courseId/:sequenceId/:unitId
See ADR #8 for more context.
All changes:
* refactor: allow courseBlocks factory to build multiple sections
* refactor: make CoursewareContainer tests less brittle & stateful
* feat: handle courseware paths more liberally
* refactor: reorder, rename, & comment redirection functions
TNL-7796
Show learners a celebratory modal if they visit the learning mfe for 3 days in a row. Call edx-platform API to determine if they should see the celebration.
AA-304
* Bumping axios-mock-adapter version
Thought there was a feature in 1.18.2 that I needed - turns out the feature hasn’t been released yet. Still fine to bump the dependency, though.
* Hiding some warnings about console logging.
* Fixes bugs in CoursewareContainer
Fixes a few bugs in the courseware container:
- Position was not being saved because we weren’t reading “saveUnitPosition” correctly.
- We weren’t calling checkContentRedirect with the right arguments - it was using a non-existent unitId instead of the routeUnitId, meaning we would redirect to the active unit even if a unit was specified in the URL.
Adds tests in CoursewareContainer for various URL and data states.
Now explicitly tests:
- Exam redirects
- The resume block method when it has, and doesn’t have, a block to resume.
- The content redirect when a unit isn’t present on the URL (uses sequence.position)
- Loading a specific unit (not the first of a sequence!) by URL.
Updated some of the factories to be more flexible/allow multiple units.
* fix: Use reselect’s defaultMemoize instead of lodash.memoize
Lodash memoize doesn’t examine all parameters when deciding to memoize, apparently, meaning it doesn’t re-call the function if any parameter except the first changes.
More here: https://dev.to/nioufe/you-should-not-use-lodash-for-memoization-3441
* Fixing test setup. Improper use of sequenceMetadata factory!
Two problems:
One, we weren’t properly passing the courseId into our sequenceMetadata factories, so it was differing than the one defined in courseMetadata. This didn’t manifest until now because we weren’t using the one from sequenceMetadata until this memoization fix!
Two, I’d updated the options for sequenceMetadata to have a “unitBlocks” option, but didn’t update all the usages of the old “unitBlock” option. This meant it was manually creating its own unit instead of inheriting the one from courseBlocks, resulting in a different ID.
We were inconsistently using “position” - a 1-indexed value - in JS arrays which are 0-indexed. We had an existing, normalized property called “activeUnitIndex” which we now use everywhere instead. The value is modified back to 1-indexed before being returned to the server.
* Adding testing-library dependencies, and bumping frontend-build to be compatible with them.
* Adding a function to initialize the redux store
We need to use it in a few places. Seems worth not-repeating, since they can easily get out of sync. In general, tests should only test the parts of the store they care about, as well.
* Adding function to initialize a mock application.
Ultimately I’d like to move this to frontend-platform as an alternative to ‘initialize’ for tests. ‘initialize’ is an async function which complicates matters.
* Using more explicit assertions for courseware reducer fields.
This removes the need for the snapshot file, and ensures our test is more resilient to unrelated changes in the store.
Also added a few more stages of assertions to some of the tests, showing that they have the right values over time.
* Adding a helper to build a simple course blocks response.
We can use this in the courseware data tests, and shortly in the tests for CoursewareContainer.
* Modifying sequenceMetadata factory to allow multiple units.
This will help us test sequence navigation’s behavior more fully by having multiple units in a sequence.
* A little linting and cleanup.
* Adding first round of tests for CoursewareContainer.
Tests loading, sequence navigation/unit rendering, and ‘denied’ states.
Subsequent tests will add tests for handlers.
* Add test for fetchCourse
* Add tests for fetchDatesTab, fetchOutlineTab, fetchSequence and resetDeadlines
* Implement fetch tabs tests
* Add fail test case for fetchSequence
* Add success test for fetchSequence
* Add test for resetDeadlines
* Update test group name
* Add empty tests for courseware and bookmarks
* Fix wrong field in saveSequencePosition thunk
* Add tests for courseware data layer
* Temporary commit
* Split tests after rebase
* Revert "Fix wrong field in saveSequencePosition thunk"
This reverts commit 4394d363c58ad929f81e587ce4da2241528494b5.
* Fix test for position
* Move executeThunk into utils
* Add test for all reducers
* Add expect statements for logs
* Remove redundant snapshot tests and add some specific checks
* Polishing
* Remove redundant checks
* Fix bug in normalizer and update test
* Upgrade @edx/frontend-platform dependency
* Utilize MockAuthService instead of manual auth package mocking
* Update tests after breaking changes in master
* Remove redundant snapshot check
